Hendler's Blades
Quality Industrial Blades

Synthetic Lubricants

Hendler’s is the supplier for KEM-A-TRIX synthetic lubricants. KEM-A-TRIX lubricants outlast grease 20 to 1 and increase bearing life substantially with an operating range of -40°F to +750°F. KEM-A-TRIX can be used in all lubricating applications including food plant machinery where it is government approved.

Conventional greases and oils are simply not made to cope with extreme operating conditions. Plant and maintenance managers are choosing to work with high performance lubricants to optimize control over downtime and benefit from significant savings in maintenance material and labour costs.

KEM-A-TRIX synthetic lubricants are made in Canada.

MSDS sheets are available as are initial purchases of single tubes.

TCCL: Thermo-Cling TCCL Machine and CHAIN OIL:

  • Designed to cling like a magnet to fast moving parts.
  • Resists being thrown off protected parts.
  • Stable from -20°F to +500°F. (-40°C to +260°C)
  • Stable under high pressure and high shear
  • Excellent water repellent properties
  • General uses in pulp and paper, secondary processing in mining, woodworking, textile, laundry, transport and material handling equipment, compressors and critical areas in machine tools.
  • Agriculture Canada Approved for use in food institutions
  • FDA approved
  • Kosher Approval protects against Corrosion, Common Chemicals, Wash-downs and Abrasive Contaminants.

TG 40-750 THERMO-GEL

  • Stable under extreme temperatures from -40°F to +750°F (-40°C to +399°C)
  • Stable under high pressure
  • Non Metallic, Non Silicone, Completely inert
  • Excellent adherence to metal surfaces
  • Agriculture Canada approved for food applications.
  • Bearing and gear applications in consistently hot and humid work environments.
  • General plant lubrications in steel milling, oven-to-freezer food processing lines, pulp and paper, woodworking, textile, laundry, lifting and material handling equipment, compressors and critical areas in machine tools.
  • Protects against Corrosion, Common Chemicals, Wash-downs and Abrasive Contaminants.

FAHRENHEIT 800 Bearing Gel

  • Stable under extreme temperatures from -40°F to +750°F (-40°C to +399°C)
  • Stable under drastic temperature swings.
  • Does not melt, run, drip, carbonize or leave abrasive residues.
  • Protects against Corrosion, Common Chemicals, Wash-downs and Abrasive Contaminants.
  • USDA H-1 Approved
  • NSF H-1 Registered (food applications)
  • Bearing applications in consistently hot and humid work environments.
  • Applications with severe temperature changes, e.g. continuous oven-to-freezer lines.
  • General plant lubrication uses in steel milling, pulp and paper, textile, lifting and material handling equipment, compressors and critical areas in machine tools.
  • Antibacterial
  • Non-carbonizing, Non-silicone
  • Extremely resistant to washout and separation.

ISF5400 Pump Packing Material

  • The injectable fluid seal for stuffing boxes, pumps and valves.
  • Injectable fluid seal forms a rigid yet compliant lubricated sealing plug that requires only minimal axial pressure to achieve a near zero leakage seal.
  • The use of the injectable fluid seal device, therefore, does not cause any heat buildup nor does it add any abrasion or wear to the shaft and other parts of the sealing system.
  • The injectable fluid seal is designed to run without the use of cooling water.
  • Replaces braided packing, mechanical seals
  • Non-compression, low friction formula
  • Suitable for use in food and beverage industry
  • Designed for on-line injection only
  • Conforms to shaft
  • Prevents wear and cavitation
  • Contributes to productivity improvement. Adds to savings in maintenance and repair expense.
  • Compatible with processes with stuffing box temperature between 0ºF and 500ºF, pressure of under 1,050 psi, shaft speed up to 3,600 RPM and pH of between 0 and 14.